Four-channel performance attenuverter/attenuator with faders and offset for Eurorack in black | Lapsus Os by Noise Engineering
Four-channel performance attenuverter/attenuator with faders and offset for Eurorack in silver | Lapsus Os by Noise Engineering

Lapsus Os

$260

Four-channel performance attenuverter/attenuator and offset

Lapsus Os is a 10HP 4-channel attenuator/attenuverter and offset. Designed with performance in mind, each channel can be set to either attenuate or attenuate/invert an incoming signal, adjust offset of an incoming signal, or with nothing patched to its input, generate a ~0-5v or ±5v offset. Switches on the back of the module invert the fader behavior, allowing for the module to be mounted in either direction, for further customization and ease of use.

Color
1

SHARE

you might also like


Xer Mixa and Expando Expandi bundle in black: the mixer has 14 stereo pairs of jacks with pairs of LEDs. Below that are momentaries for channel select, sliders for volume, switch mutes, and to the right, encoders and mometaries to control the screen. The mixer dwarfs the 4hp expander which has 8 jacks, a mysterious symbol, and an LED labeled Status. | Noise Engineering

Expressive all-analog digitally controlled mixer with clickless mutes, state save and recall, and MIDI I/O with CV expander

Nive Grad level shifter in black. The top half has two input jacks with two +12 and two +24 dB outputs. The bottom has two input jacks and two -12 and two -24 dB outputs. | Noise Engineering

4HP Stereo or dual-mono level shifter with +/- 12 and 24dB outputs

Debel Iteritas Alia 10HP additive phase-modulation voice in black. 7 knobs on top with two switches below and jacks on bottom. A bell icon near the top. | Noise Engineering

Hybrid additive phase-modulation voice on a swappable oscillator platform

Expando Expandi expander in 4HP, black edition: 8 jacks loom over a strange shape which in turn looms over an LED labeled status. | Noise Engineering

CV input expander for Xer Mixa

Basimilus Iteritas Alia 10HP universal percussion synth in black. 7 knobs on top with two switches below and jacks on bottom. A drum icon near the top.  | Noise Engineering

Universal drum synthesizer and so much more on a swappable oscillator platform

Univer Inter MIDI-to-CV module in black with USB B at top, MIDI TRS in and out below, and 8 outputs in 6HP. | Noise Engineering

Eight-channel MIDI-to-CV (and more) converter

Stereo-in, stereo-out synthetic-tail generator reverb and DSP platform for Eurorack in black | Desmodus Versio by Noise Engineering|

Stereo-in, stereo-out synthetic-tail generator reverb and DSP platform

Tymp Legio drum voice and DSP/oscillator Eurorack platform in 6hp, black aluminum panel with three knobs and LEDs and switches on top and jacks on bottom | Noise Engineering

Big digital percussion in a 6hp platform.

Manis Iteritas Alia 10HP gritty industrial voice in black. 7 knobs on top with two switches below and jacks on bottom. A saw icon near the top. | Noise Engineering

Gritty industrial voice on a swappable platform. Pangolin approved.

Xer Mixa 32HP mixer in black: 14 stereo pairs of jacks run across the top along with pairs of LEDs.  Below that are momentaries for channel select, sliders for volume, switch mutes, and to the right, encoders and mometaries to control the screen | Noise Engineering

Analog mixer with digital control with 10 stereo-paired inputs, 3 stereo bus outs, clickless mutes, state save & recall, and MIDI I/O

Incus Iteritas Alia module in black with anvil icon. 7 knobs on top, two switches on the right, and jacks on the bottom.  Oscillator platform in 10HP | Noise Engineering

Wave-mangling FM percussion and instrument voice on a swappable oscillator platform

Ataraxic Iteritas Alia module in black with UFO icon. 7 knobs on top, two switches on the right, and jacks on the bottom.  Oscillator platform in 10HP | Noise Engineering

Digital oscillator inspired by the last millennium on a swappable oscillator platform

Cursus Iteritas Alia module in black with leaf icon. 7 knobs on top, two switches on the right, and jacks on the bottom.  Oscillator platform in 10HP | Noise Engineering

Dynamically generated wavetable VCO on a swappable oscillator platform

Never Miss a Beat

Get first dibs on discounts, presales, and all NE news.

Your email address will never be shared, sold, or used for nefarious purposes.

I'm interested in news about: